Introduction:
This is a smart solar charge controller which has advanced MPPT technology .Solar charge controller is one of the important parts in the off-grid solar system. For having the advanced MPPT technology, the controller can trace the peak power with 99% conversion efficiency. MPPT microprocessor, inside the controller,making 30% more charge current with significantly less power than tradition. In addition to this, easier installing and supporting to expand volume are other advantages. It can also store energy to different kinds of batteries. We provide battery choice(Vented,Sealed,Gel,NiCd).
Feature:
1.MPPT charge mode,conversion efficiency upto 99%,can save 30%~60% of the power than traditional controller.
2.With high efficient MPPT operation scheme and adopting TI28035 chip,make the Solar panels utilization rate upto 99%.
3.Intelligent design,the device can be upgraded online,customers enjoy the lifelong upgrade service.
4.Compliance with the 2002/95/EC environment protecting demand,doesn’t include the Cadmium, hydride and fluoride
5.Adopting the well-known brand components,the devices can suffer the temperature not less than 105℃.The service life is designed to extend to 10 years in theory.
6.Charge mode: three stages (fast charge,constant charge,floating charge)
7.12V/24V/48V system auto recognize for easy control.
8.Nominal maximum solar input is DC 150V
9.Connected Battery Type choosing: Sealed lead acid, vented, Gel, NiCd battery. Other types of the batteries can also be defined.
10. LCD and LEDs show all kinds of parameter like products model, PV input voltage,battery voltage,charge current,charge power,work condition,and also can add customers’company name and website.
11. Communication Port.RS232 communication can provide communication protocol, This make the unified and integrated management more convenient to customers.
12. With providing a Microsoft by connecting with PC that can show the working state and all parameters in 7 languages.
13. Extensible LAN remote control.
14.Equipment integrity: controller+CD-ROM(microcomputer software) + communication wire+Anderson terminals;
15.CE,ROHS,FCC,PSE certifications approved.The device also can support to pass the other certifications.
16. 2 years warranty.And 3~10 years extended warranty service also can be provided.
*The specification is only for reference. Subject to change without prior notice.
*We provide OEM and ODM service.The 36V/72V/96V model also can be custom made for you.
| Model: I-P-MSC-DC12V/24V/48V-series | 40A | 50A | 60A | |
| Charge Mode | Maximum Power Point Tracking | |||
| Method | 3 stages: fast charge(MPPT),constant voltage,floating charge | |||
| System Type | DC12V/24V/48V | Automatic recognition | ||
| System Voltage | 12V system | DC9V~DC15V | ||
| 24V system | DC18V~DC30V | |||
| 48V system | DC36V~DC60V | |||
| Soft Start Time | 12V/24V/48Vsystem | ≤10S | ||
| Dynamic Response Recovery Time | 12V/24V/48Vsystem | 500us | ||
| Conversion Efficiency | 12V/24V/48Vsystem | ≥96.5%,≤99% | ||
| PV Modules Utilization Rate | 12V/24V/48Vsystem | ≥99% | ||
| Input Characteristics | ||||
| MPPT Working Voltageand Range | 12V system | DC18V~DC150V | ||
| 24V system | DC34~DC150V | |||
| 48V system | DC65~DC150V | |||
| Low Voltage InputProtection Point | 12V system | DC16V | ||
| 24V system | DC30V | |||
| 48V system | DC60V | |||
| Low Voltage InputRecovery Point | 12V system | DC22V | ||
| 24V system | DC34V | |||
| 48V system | DC65V | |||
| Max DC Voltage | 12V/24V/48V system | DC160V | ||
| Input Overvoltage Protection Point | 12V/24V/48V system | DC150V | ||
| Input Overvoltage Recovery Point | 12V/24V/48V system | DC145V | ||
| Max. PV Power | 12V system | 570W | 700W | 900W |
| 24V system | 1130W | 1400W | 1400W | |
| 48V system | 2270W | 2800W | 3400W | |
| Output Characteristics | ||||
| Selectable Battery Types (Default type is GEL battery) | 12V/24V/48Vsystem | Sealed lead acid, vented, Gel, NiCd battery (Other types of the batteries also can be defined) | ||
| Constant Voltage | 12V/24V/48Vsystem | Please check the charge voltage according to the batterytype form. | ||
| Floating Charge Voltage | 12V/24V/48Vsystem | |||
| Over Charge ProtectionVoltage | 12V system | 14.6V | ||
| 24V system | 29.2V | |||
| 48V system | 58.4V | |||
| Rated Output Current | 12V/24V/48V system | 40A | 50A | 60A |
| Current-limiting Protection | 12V/24V/48V system | 44A | 55A | 66A |
| Temperature Factor | 12V/24V/48V system | ±0.02%/℃ | ||
| Temperature Compensation | 12V/24V/48V system | 14.2V-(The highest temperature-25℃)*0.3 | ||
| Output Ripples(peak) | 12V/24V/48V system | 200mV | ||
| Output Voltage Stability Precision | 12V/24V/48V system | ≤±1.5% | ||
| Display | ||||
| LCD display | Input,output parameter and output power etc(check the LCD display instruction) | |||
| LED display | 3 LEDs indicates:Fault indicate light,charge indicatelight,power source indicate light(check the LEDinstruction) | |||
| Software Control through PC(communicationport) | RS232 (matching) or LAN (optional) | |||
| Protection | ||||
| Input Low Voltage Protection | Check the input characteristics | |||
| Input Overvoltage Protection | Check the input characteristics | |||
| Input Polarity Reversal Protection | yes | |||
| Output Overvoltage Protection | Check the output characteristics | |||
| Output Polarity Reversal Protection | yes | |||
| Short-circuit Protection | Recover after eliminating the Short-circuit fault,no problem for long term Short-circuit | |||
| Temperature Protection | 95℃ | |||
| Temperature protection | Above 85℃,decrease the output power,decrease 3Aper degree | |||
| Other Parameters | ||||
| Noise | ≤40dB | |||
| Thermal methods | Forced air cooling,fan speed rate regulated by temperature,when inner temperature is too low,fan ran slowly or stop;when controller stop working,fan also stop ran. | |||
| Components | Forced air cooling,fan speed rate regulated by temperature,when inner temperature is too low,fan ran slowly or stop;when controller stop working,fan also stop ran. | |||
| standards.All rated temperature of electrolytic capacitors not less than 105℃ | ||||
| Smell | No peculiar smell and and toxic substances. | |||
| Environment Protection | Meet the 2002/95/EC,no cadmium hydride and fluoride | |||
| Physical | ||||
| Measurement DxWxH(mm) | 270*185*90 | |||
| N.G(kg) | 3 | |||
| G.N(kg) | 3.6 | |||
| Color | Blue/Green (optional) | |||
| Safety | CE,RoHS, PSE,FCC | |||
| EMC | EN61000 | |||
| Type of Mechanical Protection | IP21 | |||
| Environment | ||||
| Humidity | 0~90%RH ( no condense) | |||
| Altitude | 0~3000m | |||
| Operating Temperature | -20℃ ~ +40℃ | |||
| Storage Temperature | -40℃ ~ +75℃ | |||
| Atmospheric Pressure | 70~106kPa | |||
1. Q: Do you have a catalogue? Can you send me the catalogue to have a check of all your products?
A: Yes , We have product catalogue.Please contact us on line or send an Email to sending the catalogue.
2. Q: I need your price list of all your products, do you have a price list ?
A: We do not have a price list of all of our products. Because we have so many items,and it’s impossible to mark all of their price on a list.And the price are always changing because of the producing cost.If you want to check any price of our products, please feel free to contact us.We will send offer to you soon!
3. Q: I can’t find the product on your catalogue, can you make this product for me?
A: Our catalogue shows most of our products,but not all.So just let us know what product do you need, and how many do you want.If we do not have it,we can also design and make a new mould to produce it.For your reference,making a ordinary mould will take about 35-45days."
4. Q: Can you provide samples ? Are the samples free ?
A: Yes,we can provide samples.Normally,we provide samples for test or quality checking.But you have to pay for the sample and shipping cost.
5. Q: What kind of payment do you accept ? Can I pay RMB ?
A: We accept T/T(Wire transfer),Western Union and Paypal. Please be sure that we can receive the same amount of the Invoice. And you can pay money In RMB. No problem."
6. Q : What about your delivery time?
A: We have a lot of products in stock.We can send the stock products in 3 work days. If without stock,or stock is not enough, we will check the delivery time with you."
"Any requirements or question,welcome to ""Send"" us an e-mail Now!!!
It's our great honor to do services for you! You also can get the FREE SAMPLES soon."
